Changing the battery in your 2018 Jeep Compass key fob is easy. You can do it at home with simple tools.
A key fob with a dead battery is frustrating. Your Jeep Compass key fob may stop working when the battery dies. Knowing how to change the battery can save you time and money. This guide will help you replace the battery quickly.
You will need a small flat-head screwdriver and a new CR2032 battery. Follow these steps to get your key fob working again.
Credit: www.aliexpress.com
Tools Needed
Changing the battery in your 2018 Jeep Compass key fob is straightforward. You need the right tools to make it easy. This section covers the tools you need.
Essential Tools
You need a few basic tools. First, a small flathead screwdriver. This helps open the key fob. You can also use a coin for this step. Next, you need a new CR2032 battery. This is the correct size for your key fob. Make sure the battery is new and fresh.
Optional Tools
A plastic pry tool can be helpful. It reduces the risk of scratching the key fob. Tweezers can help remove the old battery. They can also help place the new battery. A small cloth can keep fingerprints off the new battery. These tools are not necessary but can make the process easier.
Safety Precautions
Changing the battery in your 2018 Jeep Compass key fob is simple. But, it’s important to follow safety precautions. This ensures the process is safe and smooth. Let’s discuss key safety steps.
Handling Precautions
Handle the key fob with care. Avoid dropping it. The electronic components inside are fragile. Use a small screwdriver to open the fob. Be gentle to avoid damage. Keep the new battery in its packaging. This prevents it from shorting out before use.
Wash your hands before handling the battery. This removes oils and dirt. Clean hands ensure the battery and fob stay free from contaminants. A clean battery ensures a better connection and longer life.
Disposal Instructions
Dispose of the old battery properly. Batteries contain harmful chemicals. These can leak into the environment. Do not throw it in regular trash. Take it to a local recycling center.
Many stores accept used batteries. Check with your local hardware store. They often have battery recycling programs. Follow their guidelines to ensure safe disposal. This protects the environment and complies with regulations.
Locating The Battery Compartment
Changing the battery in your 2018 Jeep Compass key fob might seem like a daunting task, but it’s quite straightforward once you know where to look. The first step in this process is to locate the battery compartment. It’s a bit like finding a hidden treasure – you need to know where to dig! Let’s break it down step by step.
Key Fob Anatomy
Before we dive into finding the battery compartment, it helps to understand the anatomy of your key fob. The 2018 Jeep Compass key fob is compact, but it houses several important components:
- Buttons: These control the lock, unlock, panic, and remote start functions.
- LED Light: Indicates when a button is pressed.
- Battery Compartment: The hidden gem we’re seeking.
- Key Ring: Allows you to attach the fob to your keys.
Having a basic understanding of these parts will make it easier to locate the battery compartment.
Identifying The Compartment
Now, let’s get to the main event – finding the battery compartment. Here’s a step-by-step guide:
- Examine the Back: Flip your key fob over to the back side. You should see a seam running around the edge. This is the key to opening the fob.
- Find the Groove: Look closely at the seam. There’s usually a small groove or notch where you can insert a flat tool. A small flathead screwdriver or even a coin can do the trick.
- Insert and Twist: Gently insert your tool into the groove and twist. This should pop the fob open, revealing the internal components.
- Spot the Battery: Once open, you’ll see the battery compartment. It’s typically a round, shiny disc – the source of your fob’s power.
And there you have it! You’ve successfully located the battery compartment. It wasn’t so tricky, was it? Now, you’re one step closer to changing the battery and getting your key fob back in action.
Remember, patience is key. If you rush, you might damage the fob. Take your time, follow these steps, and you’ll manage just fine. Good luck!
Opening The Key Fob
Changing the battery in your 2018 Jeep Compass key fob is simple. The first step is to open the key fob. This is a crucial part of the process. It requires patience and a bit of care.
Prying Open The Case
To start, locate the seam on the key fob. This is where the two halves of the case meet. Use a small flathead screwdriver or a plastic pry tool. Gently insert the tool into the seam. Twist the tool to start separating the halves.
Work your way around the fob. Carefully continue prying it open. Be gentle to avoid breaking the plastic. The case should eventually pop open. Now, you have access to the inside of the key fob.
Avoiding Damage
While opening the key fob, take your time. Rushing can cause damage. Avoid using too much force. This can crack the plastic or break internal parts. Ensure the tool you use is not too sharp. A sharp tool can scratch or damage the case.
Another tip is to use a plastic tool. It is less likely to cause damage compared to a metal tool. If using a metal screwdriver, wrap the tip with tape. This provides extra protection. Always be cautious during this process. Keeping the key fob intact is essential.
Removing The Old Battery
Changing the battery in your 2018 Jeep Compass key fob may sound like a daunting task, but with a bit of guidance, you’ll have it done in no time. To start with, let’s focus on removing the old battery. This step-by-step process ensures that you handle your key fob carefully and avoid any damage. Ready to dive in? Let’s get started!
Battery Position
Before you can remove the old battery, you need to know where it’s located. The battery in the 2018 Jeep Compass key fob is typically housed in a small compartment on the back side of the fob. Here’s how to find it:
- Turn the key fob over so that the buttons are facing down.
- Look for a small seam or gap along the edge of the fob. This is where the battery compartment is situated.
Got it? Great! Now let’s move on to the next step.
Careful Removal
Now that you’ve located the battery compartment, it’s time to remove the old battery. This step requires a bit of delicacy to avoid damaging the fob. Follow these simple steps:
- Using a small flathead screwdriver or a coin, gently pry open the battery compartment. Be careful not to use too much force, as this might crack the plastic.
- Once the compartment is open, you’ll see the battery nestled inside. Take note of how the battery is positioned, with the positive (+) side facing up.
- Using your fingers or a small tool, carefully lift the old battery out of its slot. Avoid touching the battery terminals with your bare hands to prevent any residue transfer.
And there you have it! The old battery is now out, and you’re ready to insert the new one. Piece of cake, right?
Removing the old battery isn’t just about getting it out of the fob—it’s about doing so in a way that keeps your key fob in tip-top shape. By following these steps, you ensure a smooth process without any hiccups. Remember, patience is key!
Credit: www.youtube.com
Inserting The New Battery
Inserting the new battery into your 2018 Jeep Compass key fob is a straightforward process. This step ensures your key fob functions correctly. Follow these simple steps to ensure the new battery is properly placed and connected.
Correct Placement
First, locate the battery compartment in the key fob. Position the new battery with the positive (+) side facing up. This is crucial for the battery to work correctly. If you position it incorrectly, the key fob will not function.
Ensuring Proper Contact
Next, ensure the battery makes proper contact with the terminals. Press the battery gently into the compartment. Verify that the contacts touch the battery securely. This ensures a stable connection and reliable function.
Finally, reassemble the key fob. Snap the cover back into place. Test the key fob to ensure it works correctly. If it does not, check the battery placement and contact points again.
Reassembling The Key Fob
Reassembling the key fob is an important step after changing the battery. This process ensures the key fob remains functional and durable. Follow these steps to reassemble the key fob correctly.
Aligning The Halves
First, align the two halves of the key fob. Check the edges to make sure they fit together. Pay attention to the buttons and grooves. They must align properly. This ensures the key fob works smoothly.
Securing The Case
Once aligned, press the halves together. Start from one end and move to the other. Ensure the case clicks into place. This step prevents the key fob from falling apart. Double-check to confirm all sides are secure. Your key fob is now ready for use.
Credit: www.amazon.com
Testing The Key Fob
After replacing the battery in your 2018 Jeep Compass key fob, ensure it works correctly. Testing the key fob is a crucial step. This process confirms the new battery is functioning and the key fob is communicating with your vehicle.
Functionality Check
Stand near your Jeep Compass. Press each button on the key fob. Lock, unlock, and panic buttons should respond. Observe the vehicle’s reaction. The doors should lock and unlock as expected. The panic button should activate the alarm.
Troubleshooting
If the key fob doesn’t work, you may need to troubleshoot. Check the battery orientation. Ensure it is placed correctly. Double-check the battery type. Use the right one recommended for your key fob.
If the key fob still fails, try resetting it. Consult your vehicle’s manual for reset steps. If all fails, consult a professional for further assistance.
Frequently Asked Questions
How Do I Change My 2018 Jeep Compass Key Fob Battery?
To change your 2018 Jeep Compass key fob battery, open the fob using a small flat tool. Replace the old battery with a new CR2032 battery. Ensure the positive side faces up. Snap the fob back together. Test to confirm it works.
What Size Battery Does A 2018 Jeep Compass Key Fob Take?
The 2018 Jeep Compass key fob uses a CR2032 battery. This battery is widely available and easy to replace.
Do You Have To Reprogram Jeep Key Fob After Changing Battery?
No, you don’t have to reprogram your Jeep key fob after changing the battery. It should work immediately.
How Do You Start A 2018 Jeep Compass With A Dead Key Fob?
To start a 2018 Jeep Compass with a dead key fob, press the brake pedal. Hold the key fob against the start button. Push the start button while holding the fob. The vehicle should start. Replace the key fob battery soon.
Conclusion
Changing the battery in your 2018 Jeep Compass key fob is simple. Follow these steps to save time and avoid hassle. Use a small screwdriver and a new CR2032 battery. Ensure the battery is placed correctly. Test the key fob to confirm it works.
Regularly check the battery to avoid sudden issues. Always keep a spare battery handy. This small task ensures your key fob stays functional. Enjoy the convenience and peace of mind. Your Jeep Compass key fob is now ready to use!