How to Change Fog Light on 2018 Jeep Compass

Changing the fog light on a 2018 Jeep Compass can seem tricky. But with the right steps, you can do it yourself.

Fog lights are essential for safe driving in poor visibility. If one of your fog lights goes out, you need to replace it quickly. This guide will help you change the fog light on your 2018 Jeep Compass. We will walk you through each step, making the process simple and easy to follow.

By the end, you’ll have your fog light changed and ready for the road.

Tools And Materials Needed

Changing the fog lights on your 2018 Jeep Compass might seem like a daunting task, but with the right tools and materials, you’ll have it done in no time. Before we jump into the nitty-gritty of the process, let’s make sure you have everything you need. In this section, we’ll outline all the necessary tools and materials required for a smooth and successful fog light replacement.

Required Tools

First things first, let’s gather all the tools you’ll need. Having the right tools on hand will save you a lot of headaches and ensure the job goes smoothly. Here’s a list of the essential tools:

• Screwdriver Set: You’ll need both flathead and Phillips screwdrivers.
• Socket Wrench Set: A variety of socket sizes will come in handy.
• Torch or Flashlight: To help you see in those hard-to-reach areas.
• Trim Removal Tool: This will make removing the trim a breeze.
• Safety Gloves: Protect your hands from any sharp edges.

These tools are pretty common, so you might already have them in your garage. If not, a quick trip to your local hardware store should do the trick.

Necessary Materials

Now that you’ve got your tools sorted, let’s talk about the materials. These are just as important and will ensure a seamless installation process. Here’s what you’ll need:

1. Replacement Fog Light Bulbs: Make sure to get the correct bulbs for your 2018 Jeep Compass. Check your vehicle’s manual or consult with your auto parts store.
2. Electrical Tape: For securing any loose wires.
3. Rags or Towels: To clean the area and handle the bulbs without touching them directly.

Using the right materials is crucial for a successful fog light replacement. It ensures that your new lights will function properly and last a long time.

With these tools and materials in hand, you’re well on your way to changing the fog lights on your 2018 Jeep Compass. Remember, preparation is key. Gather everything you need before you start, and you’ll find the process much smoother and more enjoyable. Ready to get started? Let’s move on to the step-by-step guide!

Safety Precautions

Changing the fog lights on your 2018 Jeep Compass is a straightforward task. But safety precautions are essential. Proper preparation ensures you avoid accidents and damage to your vehicle. Follow these guidelines to ensure a smooth and safe process.

Protective Gear

Always wear gloves to protect your hands from sharp objects. Eye protection is crucial. Small debris can cause serious injuries. Closed-toe shoes prevent foot injuries from falling tools. A long-sleeved shirt adds an extra layer of protection.

Vehicle Preparation

First, park your Jeep Compass on a flat surface. Engage the parking brake to prevent movement. Turn off the engine and remove the key from the ignition. Open the hood to disconnect the battery. This prevents electrical shocks.

Ensure the vehicle is cool before you start. Hot parts can cause burns. Gather all necessary tools. This includes a screwdriver, a wrench, and the new fog light. Having everything on hand makes the process smoother.

Accessing The Fog Lights

So, you’ve decided to change the fog lights on your 2018 Jeep Compass? Great choice! These lights are crucial for driving in foggy weather. But first, let’s talk about how to access them. It’s not as tricky as it sounds. With a few simple steps, you’ll be able to locate and remove the cover of the fog lights. Let’s dive into it!

Locating The Fog Lights

The first step is to locate the fog lights. They are positioned at the lower part of the front bumper. You’ll find one on each side. Here’s a simple way to find them:

• Stand in front of your Jeep Compass.
• Look at the lower corners of the front bumper.
• Spot the round lights nestled in those corners. These are your fog lights!

Easy, right? Now that you know where they are, let’s move on to the next step.

Removing The Cover

Now, let’s get our hands a little dirty. Removing the cover is a piece of cake if you follow these steps:

1. Grab a flathead screwdriver or a plastic trim tool. This will help you pry off the cover without damaging it.
2. Insert the tool gently into the gap between the cover and the bumper.
3. Apply a little pressure and gently pry the cover off. Be careful not to use too much force.
4. Once the cover is loose, pull it out with your hands.

And there you have it! You’ve successfully removed the cover. Now, you can see the fog light clearly. Wasn’t that simple? Remember, patience is key here. Take your time and avoid rushing. Next, we’ll talk about replacing the actual fog light. Stay tuned!

Credit: www.youtube.com

Removing The Old Fog Light

Changing the fog light on your 2018 Jeep Compass can seem difficult. But with the right steps, it becomes much easier. The first task is to remove the old fog light. This involves two main steps: disconnecting the power and taking out the bulb. Let’s walk through these steps to ensure a smooth process.

Disconnecting The Power

First, turn off your Jeep and open the hood. Locate the fog light assembly. Find the power connector at the back of the fog light. Gently press the tab and pull the connector out. This disconnects the power supply to the fog light.

Taking Out The Bulb

Next, locate the back of the fog light housing. Turn the bulb counterclockwise to unlock it. Carefully pull the bulb out of the housing. Be sure to handle the bulb with care. Do not touch the glass part with your fingers. Oils from your skin can damage the new bulb.

Installing The New Fog Light

Changing the fog light on your 2018 Jeep Compass may seem daunting, but it’s actually quite straightforward. Whether you’re a novice or have some experience with car maintenance, this guide will help you navigate the process smoothly. So let’s dive into the exciting part: installing the new fog light!

Inserting The New Bulb

Now that you’ve removed the old fog light, it’s time to insert the new one. First, make sure your hands are clean or use gloves to avoid getting oils on the new bulb. Oils can cause the bulb to burn out faster, and we certainly don’t want that.

Here’s a quick step-by-step:

1. Take the new bulb out of its packaging carefully.
2. Align it with the socket where the old bulb was.
3. Insert the new bulb gently but firmly.

Remember, you should hear a click or feel it lock into place. If it doesn’t, double-check the alignment and try again.

Securing The New Light

Once the new bulb is in place, it’s essential to secure it properly. This ensures it stays put while you’re driving through foggy weather or bumpy roads.

Follow these steps to secure the new light:

• Reconnect the wiring harness to the back of the new fog light bulb.
• Push the bulb into the housing until you feel it snap into place.
• Check to ensure the bulb is seated properly.

Take a moment to admire your handiwork. You’re almost done! Double-check everything to make sure the new fog light is secure. Sometimes, taking an extra minute to check saves a lot of trouble later.

Finally, test the new fog light by turning it on. If it lights up, congratulations! You’ve successfully installed a new fog light on your 2018 Jeep Compass.

Wasn’t that easier than you thought? Now you can drive through foggy conditions with confidence, knowing your new fog light is working perfectly.

Credit: www.ebay.com

Reassembling The Components

After replacing the fog light on your 2018 Jeep Compass, it’s time to reassemble the components. This step is crucial to ensure everything fits correctly and functions as it should. Let’s break it down into simple steps.

Replacing The Cover

First, locate the cover you removed earlier. Align the cover with its original position on the fog light housing. Carefully snap the cover into place. Ensure all clips are secure. Double-check to avoid any gaps. This prevents dust or moisture from entering.

Ensuring Proper Fit

Next, inspect the fog light assembly. Make sure everything is snug. Wiggle the fog light gently. There should be no movement. If it feels loose, recheck the screws. Tighten them if needed. A secure fit ensures the fog light performs well.

Finally, test the fog light. Turn on your Jeep Compass. Check if the fog light illuminates correctly. If it does, you have successfully reassembled the components. If not, revisit the previous steps.

Testing The New Fog Light

So, you’ve successfully changed the fog light on your 2018 Jeep Compass. Great job! But wait, don’t celebrate just yet. Now it’s time to test the new fog light. This step ensures that your hard work has paid off and the new light functions perfectly. Let’s dive into the details.

Turning On The Fog Lights

First things first, you need to turn on the fog lights. Make sure your Jeep is in a safe, open area, away from traffic. Here’s a simple step-by-step guide:

1. Sit in the driver’s seat and turn on the ignition.
2. Locate the fog light switch; it’s usually on the same lever as the headlight controls.
3. Turn the switch to activate the fog lights. You should see an indicator light on your dashboard confirming they are on.

Checking For Functionality

Now that your fog lights are on, it’s time to ensure they’re working correctly. A non-functioning fog light can be frustrating and, more importantly, unsafe. Follow these simple steps:

• Visual Inspection: Step out of your Jeep and observe the fog lights. Both should be equally bright. If one appears dim or flickers, there might be an installation issue.
• Illumination Check: Test the lights in a dark or foggy area to see how well they illuminate. They should cast a wide, low beam to improve visibility close to the ground.
• Dashboard Indicator: Ensure the fog light indicator on your dashboard is lit. If it’s not, there might be an electrical issue.

Did everything check out? Awesome! Your fog lights are ready to guide you through the foggy nights and murky mornings. If something’s off, double-check the installation or consult a professional. After all, safety first!

Credit: www.ebay.com

Tips And Troubleshooting

Changing the fog light on a 2018 Jeep Compass may seem simple. But there can be hurdles along the way. Follow these tips and troubleshooting advice. Ensure a smooth replacement process.

Common Issues

Sometimes the fog light cover is stuck. Use a flathead screwdriver to pry it open gently. If the bulb doesn’t fit, check if you have the correct size. The connector may be tight. Wiggle it slightly to loosen it. Ensure the new bulb is seated properly. Misalignment can cause it not to light up.

Additional Tips

Wear gloves to prevent oil from your hands from touching the bulb. Oils can shorten the bulb’s life. Check the fog light fuse if the light still doesn’t work. Replacing a blown fuse may solve the problem. Always refer to the owner’s manual for specific instructions. It contains useful diagrams and part numbers. Use a flashlight to see better in tight spaces. Label screws and small parts to avoid confusion during reassembly. Take your time and don’t rush the process.

Frequently Asked Questions

Can You Replace A Fog Light Yourself?

Yes, you can replace a fog light yourself. Follow your car’s manual for guidance. Ensure the vehicle is off and cool. Use the correct tools and replacement bulb.

How Do You Turn Off The Fog Lights On A 2018 Jeep Compass?

To turn off the fog lights on a 2018 Jeep Compass, locate the headlight control switch. Rotate the switch to the off position.

How To Remove Bulb From Fog Light?

To remove a fog light bulb, turn off the car and open the hood. Disconnect the fog light wiring harness, twist the bulb counterclockwise, and pull it out gently. Replace with a new bulb by reversing these steps.

Where Is The Fog Light Switch?

The fog light switch is usually located on the dashboard or the steering column. Check your vehicle’s manual for the exact position.

Conclusion

Changing the fog light on a 2018 Jeep Compass is straightforward. Follow the steps carefully. Gather the necessary tools and a replacement bulb. Remove the old bulb and insert the new one. Make sure it fits properly. Test the new light to ensure it works.

This process saves time and money. Now, your Jeep Compass is ready for any foggy weather. Keep your lights in top shape for safe driving. Enjoy your journey with clear visibility.