Jump starting a 2017 Jeep Grand Cherokee is straightforward. First, connect the jumper cables correctly.
Then, start the engine of the working vehicle. A dead battery can be stressful, especially if you’re in a hurry. Knowing how to jump start your 2017 Jeep Grand Cherokee can save you time and frustration. This guide will walk you through the steps to get your vehicle running again.
Whether you’re at home or stranded somewhere, you’ll find that jump starting your Jeep is easier than you think. With clear instructions and a little patience, you’ll be back on the road in no time. Let’s get started!
Credit: www.carcarekiosk.com
Preparation Steps
Jump starting your 2017 Jeep Grand Cherokee can be simple with the right preparation steps. Ensuring you follow these steps can save you time and trouble. Let’s dive into the details!
Safety Precautions
Before starting, it’s important to take some safety measures. Ensure both vehicles are turned off and in park or neutral. Engage the parking brakes. Keep metal objects away from the battery to prevent accidents. Wear safety goggles and gloves to protect yourself.
Gather Necessary Tools
Having the right tools ready is crucial. You’ll need a set of jumper cables. Make sure they are in good condition. You might also need another vehicle with a fully charged battery. A portable jump starter can be useful too.
Credit: www.youtube.com
Locate Battery
Jump starting your 2017 Jeep Grand Cherokee can seem a bit daunting at first. But don’t worry, once you know where everything is, it’s a breeze. The first step is to locate the battery. You need to find it before you can jump start the vehicle. Let’s break it down into simple steps.
Open Hood
To locate the battery, you first need to pop the hood. Pull the hood release lever inside your car. It’s usually on the driver’s side, near the door. Once you pull the lever, go to the front of your Jeep and feel for the latch under the hood. Lift the hood and secure it with the prop rod. Got it? Great!
Identify Battery Terminals
Now that the hood is open, you need to identify the battery terminals. The battery is typically located near the front of the engine bay. In some vehicles, it might be covered with a plastic shroud. Remove the shroud if necessary. You’ll see two terminals on the battery: one marked with a + (positive) sign and the other with a – (negative) sign. These terminals are where you’ll connect the jumper cables.
Here’s a quick tip: If you’re having trouble locating the battery, check your Jeep’s manual. It has detailed diagrams and can be a lifesaver.
Position The Vehicles
Position the vehicles close enough for the jumper cables to reach both batteries. Ensure both cars are in park and turned off.
Jump starting a 2017 Jeep Grand Cherokee requires some preparation. One key step is positioning the vehicles correctly. This ensures a safe and efficient jump start. Proper positioning also reduces the risk of damage to either vehicle.Park Close Together
First, park the two vehicles close together. The vehicles should be close enough for the jumper cables to reach both batteries. Aim for a distance of about 18 inches. This ensures a good connection.Turn Off Engines
Next, turn off both engines. This prevents electrical issues during the jump start. Ensure all accessories, like lights and radios, are off too. This helps maintain a stable power flow. Now, you are ready to connect the jumper cables. “`Connecting Jumper Cables
Jump-starting a 2017 Jeep Grand Cherokee requires connecting jumper cables correctly. Follow these steps to ensure a safe and successful jump-start. Properly connecting the cables is crucial. Let’s break down each step.
Attach Red Clamp To Dead Battery
First, open the hood of the 2017 Jeep Grand Cherokee. Locate the battery. You will see two terminals: positive and negative. The positive terminal usually has a red cover or a “+” sign. Attach the red clamp to the positive terminal of the dead battery. Make sure it is secure. This is the first step in providing power to the dead battery.
Attach Red Clamp To Live Battery
Next, you will need the working vehicle. Open its hood and locate its battery. Find the positive terminal, marked with a “+” or red cover. Attach the other red clamp to the positive terminal of the live battery. This completes the first part of the circuit. The connection between the two batteries is now established.
Complete The Circuit
Jump-starting your 2017 Jeep Grand Cherokee can seem like a daunting task, especially if you’re not a car expert. However, understanding how to complete the circuit will make the process a lot easier. This step is crucial because it ensures that the electrical current flows properly between the batteries. Let’s break it down into simple steps to get you back on the road quickly and safely.
Attach Black Clamp To Live Battery
First things first, you need to attach the black clamp to the live battery. This is the battery of the car that is providing the jump. Start by locating the negative terminal, usually marked with a minus (-) sign. Attach the black clamp securely to this terminal. Make sure the connection is tight, as a loose connection can prevent the jump-start from working.
Pro Tip: Always double-check that the clamp is not touching any metal parts of the car other than the terminal. This prevents accidental sparks, which can be dangerous.
Attach Black Clamp To Ground Point
Now, for the last step to complete the circuit, you need to attach the other black clamp to a ground point on your Jeep Grand Cherokee. A ground point is any unpainted metal surface on the engine block or the frame of the car. Why not the battery’s negative terminal, you ask? Attaching to a ground point minimizes the risk of a spark near the battery, which could be hazardous.
Note: Look for a shiny, unpainted bolt or metal part for the best connection. This ensures a stable grounding and a successful jump-start.
And there you have it! By following these easy steps, you’ve successfully completed the circuit. Your Jeep Grand Cherokee should be ready to start now. If it doesn’t start right away, wait a few minutes and try again. Sometimes the batteries need a bit more time to charge.
Remember, practice makes perfect. The more familiar you become with your vehicle, the easier these tasks will be in the future. Safe travels!
Start The Engine
If your 2017 Jeep Grand Cherokee is having trouble starting, a jump start might be just what it needs. But don’t worry, it’s not as daunting as it sounds. Follow these simple steps, and you’ll have your Jeep roaring back to life in no time.
Start The Working Vehicle
First things first, you’ll need another vehicle with a working battery. This is often called the ‘working vehicle’. Once you’ve got your helping hand lined up, park the two cars close enough so the jumper cables can reach both batteries. Now, make sure both vehicles are turned off. Safety first!
Attach one end of the red jumper cable to the positive terminal of the working vehicle’s battery. This terminal is usually marked with a “+” sign or red color. Then, attach the other end of the red cable to the positive terminal of your Jeep’s battery.
Now, take the black jumper cable. Attach one end to the negative terminal of the working vehicle’s battery (marked with a “-” sign or black color). The other end of the black cable goes to an unpainted metal surface on your Jeep, away from the battery. This helps avoid sparks.
Start The Jeep
With everything connected, it’s time to start the working vehicle. Let it run for a few minutes. This will allow the battery to transfer some of its charge to your Jeep’s battery. You can even lightly rev the engine if you want to speed up the process.
After a few minutes, try starting your Jeep. Turn the key in the ignition, and with a bit of luck, your Jeep will spring to life. If it doesn’t, wait a few more minutes and try again. Sometimes, it takes a bit more time for the battery to get enough charge.
Once your Jeep is running, disconnect the cables in the reverse order of how you attached them. Start with the black cable from the metal surface on your Jeep, then the black cable from the working vehicle’s battery. Next, remove the red cable from your Jeep’s battery, and finally, the red cable from the working vehicle’s battery.
And there you have it! Your 2017 Jeep Grand Cherokee is up and running again. Just remember to let it run for a while to recharge the battery fully. Happy driving!
Remove Jumper Cables
After successfully jump-starting your 2017 Jeep Grand Cherokee, it’s crucial to remove the jumper cables properly. This ensures the safety of both vehicles and their electrical systems. Follow these steps to remove the cables without causing damage.
Disconnect In Reverse Order
Start by disconnecting the negative cable from the assisting vehicle. This is the black cable attached to the negative terminal. Next, disconnect the negative cable from your Jeep Grand Cherokee. Then, remove the positive cable from the assisting vehicle. Finally, disconnect the positive cable from your Jeep. This reverse order helps prevent short circuits.
Avoid Cable Clashes
Ensure the jumper cables do not touch each other. Any contact between the cables can cause sparks or short circuits. Hold each cable end separately. Place the cables away from any metal parts. This practice keeps you and your vehicle safe.
Post-jump Procedures
Jump starting your 2017 Jeep Grand Cherokee is just the first step. Once the engine roars back to life, the next steps are crucial. These procedures ensure your vehicle runs smoothly and prevent future battery problems.
Run The Engine
Keep the engine running for at least 20 minutes. This allows the alternator to charge the battery. Driving around is better than idling. It helps charge the battery faster. Avoid turning off the engine during this period. A sudden stop can drain the battery again.
Check Battery Health
After the engine has run, check the battery’s health. Use a multimeter to test the battery voltage. A healthy battery should read between 12.4 and 12.7 volts. If the reading is lower, the battery might need replacement. Look for signs of corrosion on the battery terminals. Clean them if needed. Corroded terminals can affect the battery’s performance.
If you’re unsure about your battery’s condition, consult a professional. They can perform a detailed battery test. Regular checks can prevent unexpected battery failures. Keep your Jeep Grand Cherokee in top shape.
Credit: www.jeepgarage.org
Frequently Asked Questions
Where Do You Put Jumper Cables On A Jeep Cherokee?
Attach the red cable to the positive terminal of the Jeep Cherokee’s battery. Connect the black cable to a metal ground point.
How To Start A Jeep Grand Cherokee With A Dead Battery?
To start a Jeep Grand Cherokee with a dead battery, use jumper cables. Connect to a working vehicle’s battery. Ensure positive and negative terminals are correctly matched. Start the working vehicle, then try starting your Jeep. Once started, let it run to recharge the battery.
Where Is The Battery Located On A 2017 Jeep Grand Cherokee?
The battery in a 2017 Jeep Grand Cherokee is located under the passenger seat. Access it by removing the seat cover.
Why Is My 2017 Jeep Cherokee Not Starting?
Your 2017 Jeep Cherokee might not start due to a dead battery, faulty starter, or fuel system issues. Check connections and fuses.
Conclusion
Jump starting your 2017 Jeep Grand Cherokee can seem daunting. Follow these simple steps to get back on the road quickly. Always ensure you have jumper cables and a working car battery. Connect the cables correctly to avoid damage. Patience and safety are key.
Now, you can confidently handle a dead battery situation. Enjoy a smooth ride in your Jeep Grand Cherokee. Remember, regular maintenance prevents most battery issues. Safe travels!