To open the gas tank on a 2018 Jeep Cherokee, locate the fuel door. Then, press the fuel door to open it.
Owning a 2018 Jeep Cherokee is a great experience. But, some tasks can be confusing. One such task is opening the gas tank. This simple guide will help you understand how to do it. You do not need special tools or skills.
Just follow the steps and you will be set. Whether you are new to the Jeep family or just need a quick refresher, this guide will make it easy. Let’s get started and make sure your refueling process is smooth and hassle-free.
Credit: www.tiktok.com
Locating The Gas Tank
Find the gas tank release button inside the 2018 Jeep Cherokee. It is located on the driver’s side door panel. Push it to open the gas tank lid.
Exterior Check
First, walk around your Jeep Cherokee. Look for the fuel door. It is usually on one side of the car. Check both sides. The door is flat and blends in with the car’s body.
Identifying The Fuel Door
The fuel door might have a small icon. This icon shows a gas pump. The icon helps you find the fuel door quickly. Look near the rear of the vehicle. You will find the fuel door there.
Credit: www.youtube.com
Accessing The Fuel Door Release
Look for the fuel door release button on the driver’s side. It is usually near the door handle or on the dashboard. Press the button to unlock the fuel door. The fuel door should pop open easily. Make sure the car is in park mode before trying this.
If the button does not work, use the manual release option. Find the fuel door on the outside of the car. Gently press on the edge of the door. It should click and open. Be careful not to use too much force.
Opening The Fuel Door
Locate the fuel door release button inside the vehicle. It is usually on the driver’s side, near the bottom of the dashboard. Press the button firmly to open the fuel door. The fuel door should pop open slightly. You can then pull it open fully by hand.
If the release button does not work, you can open the fuel door manually. First, exit the vehicle and walk to the fuel door. Try to pull the fuel door open by hand. Sometimes, it may be stuck. Be gentle but firm. If it still does not open, check the vehicle’s manual for further instructions.
Removing The Gas Cap
Open the gas door by pushing it gently. You will see the gas cap. Turn the gas cap counterclockwise. Keep turning until it comes off. The cap might be tight. Use both hands if needed.
Ensure the car is off before opening the gas cap. Never smoke near the gas tank. Keep away from open flames. Check for any fuel spills. Clean up spills immediately. Keep children away from the gas area.
Filling The Gas Tank
Always use the recommended fuel for your Jeep Cherokee. This ensures optimal performance. Check the owner’s manual for fuel type details. Using the wrong fuel can damage your engine.
First, unlock your gas tank door. Locate the fuel door release inside your vehicle. Press the release button. The fuel door will pop open. Then, remove the gas cap by turning it counterclockwise. Insert the pump nozzle into the tank. Squeeze the handle to start fueling. Be sure to monitor the fuel level as you fill up. Once done, remove the nozzle. Turn the gas cap clockwise to close. Finally, close the fuel door.
Credit: www.tiktok.com
Securing The Gas Cap
To open the gas tank on a 2018 Jeep Cherokee, press the fuel door release button located inside the car. Then, turn the gas cap counterclockwise to remove it.
Proper Tightening
After filling up, secure the gas cap. Turn it clockwise. You will hear clicks. Three clicks mean the cap is tight. This prevents gas fumes from escaping. It also keeps dirt out of the tank.
Ensuring A Seal
Check the cap. Make sure it is snug. Look for any gaps. A good seal is important. It helps the engine run smoothly. It also keeps the environment clean. If the cap is loose, tighten it more.
Closing The Fuel Door
Easily open the gas tank on a 2018 Jeep Cherokee by pressing the fuel door. Ensure it closes securely after fueling.
Aligning The Door Locking Mechanism
First, make sure the fuel door is aligned with the car body. This step is very important. The door should fit snugly. Check for any gaps. If the door is not aligned, it will not lock properly. Use gentle pressure to adjust the door.
Next, listen for a click when the door closes. This sound means the locking mechanism is engaged. If you do not hear a click, try again. Ensure the door is fully closed. This prevents fuel theft and keeps the area clean.
Troubleshooting Common Issues
Sometimes, the fuel door won’t open due to a mechanical issue. Check if the lock mechanism is stuck. Use a small tool to gently pry it open. Make sure the fuel door release lever inside the car works. If it still won’t open, the release cable might be broken. This needs a visit to a mechanic.
A loose gas cap can cause issues. Tighten it until you hear a click. If the gas cap is damaged, replace it. A broken gas cap can trigger the check engine light. Buy a new one from a Jeep dealer. Always ensure your gas cap is secure after filling up.
Frequently Asked Questions
How Do You Open The Gas Tank On A Jeep Cherokee?
To open the gas tank on a Jeep Cherokee, locate the fuel door on the driver’s side. Press to open.
Where Is The Fuel Tank Release Button?
The fuel tank release button is usually located on the driver’s side, near the floor or on the door. Consult your vehicle’s manual for the exact location.
Does A 2018 Jeep Grand Cherokee Have A Gas Cap?
Yes, the 2018 Jeep Grand Cherokee has a gas cap. It’s located on the driver’s side rear quarter panel.
How To Unlock A Jeep Gas Cap?
To unlock a Jeep gas cap, insert the key into the cap’s lock. Turn the key counterclockwise. Remove the cap.
Conclusion
Opening the gas tank on a 2018 Jeep Cherokee is simple. Follow the steps outlined, and you’ll refuel without stress. Always ensure your vehicle is off before starting. This ensures safety and prevents errors. Remember, practice makes it easier each time.
With these tips, you’re ready to handle refueling confidently. Safe driving and happy travels!