Opening the hood of your 2020 Jeep Cherokee is straightforward. First, locate the interior hood release lever.
Then, engage the exterior latch to lift the hood. Understanding how to open your vehicle’s hood is vital for basic maintenance and safety checks. Whether you need to check the oil, refill fluids, or inspect the engine, knowing how to access the hood is the first step.
The process for the 2020 Jeep Cherokee is simple and can be done quickly with a bit of guidance. This guide will walk you through each step, ensuring you can confidently open your Jeep’s hood whenever needed. Let’s get started.
Credit: www.youtube.com
Preparation Steps
Always ensure your Jeep is parked on a flat surface. Engage the parking brake. This stops the Jeep from moving. Turn off the engine. Let the Jeep cool down. The engine and parts can be hot. Wear gloves to protect your hands. Keep kids and pets away from the Jeep.
Most of the time, no tools are needed. But if the hood latch is stuck, you might need a flathead screwdriver. A small flashlight can help to see better under the hood. Always keep these tools handy.
Locate Hood Release
To open the hood on a 2020 Jeep Cherokee, locate the hood release lever inside the vehicle. This lever is typically found on the lower left side of the dashboard near the driver’s seat. Pull the lever to release the hood latch.
Interior Hood Release
Find the hood release lever inside the car. It is usually under the dashboard on the driver’s side. Pull the lever firmly until you hear a click. This click means the hood is now unlatched.
Exterior Hood Release
Go to the front of the car. Look under the hood for a small latch. It is usually in the middle. Push the latch upward or to the side. This will fully release the hood. Lift the hood carefully. Use the prop rod to keep it open.
Release Hood Latch
Find the hood release lever inside your Jeep. This lever is usually located under the dashboard. Pull the lever towards you. You will hear a click. This means the hood is partially open.
Go to the front of your Jeep. Feel under the center of the hood. You will find the secondary latch. Push the latch up. This will fully release the hood. Lift the hood slowly and prop it open. Ensure it is secure before working under it.
Credit: www.jeepcherokeeclub.com
Open The Hood
To open the hood, first find the hood release lever. It is located inside your Jeep, near the driver’s seat. Pull the lever. You will hear a click sound. This means the hood is now released.
Go to the front of your car. Feel for the safety latch under the hood. It is at the center. Lift the latch and then raise the hood. Use your other hand to hold the hood up.
Look for the hood prop rod. It is under the hood, near the front. Lift the prop rod and place it in the designated slot. Make sure it is secure. This will keep the hood open while you work.
Inspect The Engine Bay
To open the hood on a 2020 Jeep Cherokee, locate the release lever inside the cabin near the driver’s seat. Pull the lever, then move to the front of the vehicle and lift the hood latch to access the engine bay.
Checking Fluid Levels
First, make sure the car is off. Next, open the hood and secure it. Look at the coolant level. The tank should be between the “min” and “max” marks. Check the engine oil. Pull out the dipstick, wipe it clean, then put it back. Pull it out again and see the oil level. It should be between the marks. Finally, check the brake fluid. The level should be near the “max” line.
Looking For Leaks
Inspect the engine bay carefully. Look for any wet spots. Leaks can come from hoses or the engine. Check under the car too. Look for any puddles. If you see any, note the color. Green or pink usually means coolant. Brown or black often means oil. Clear or yellow could be brake fluid.
Credit: www.jeepcherokeeclub.com
Close The Hood
Hold the hood with both hands. Lower it slowly. Make sure it aligns with the latch. Do not drop it suddenly. This can damage the hood. Lowering it gently is important. It will prevent any dents or scratches.
Press down on the hood. Make sure it clicks into place. Tug on it lightly to check. It should not move. If it moves, press down again. Ensure it is secure. This keeps the hood from opening while driving. Safety is key.
Troubleshooting
Sometimes, the hood on your 2020 Jeep Cherokee gets stuck. First, check if the hood release lever inside the car is working. If it feels loose, try pulling it a few times. If the lever works but the hood still won’t open, the problem might be under the hood. Ask someone to pull the lever while you try to lift the hood.
A damaged latch can also stop the hood from opening. Look for any visible damage on the latch. Sometimes, rust or dirt can block it. Clean the latch with a soft brush and apply some lubricant. If the latch is bent or broken, you may need to replace it. Always handle the latch with care to avoid further damage.
Regular Maintenance
Lubricating the hood latch is important. Use a good spray lubricant. Spray it on the latch. Move the latch back and forth. This helps the lubricant spread. Do this every few months. It keeps the latch working well.
Check the hood latch for rust. Rust can make the latch stick. If you see rust, use a rust remover. Apply it to the rusty areas. Let it sit for a few minutes. Wipe it off with a clean cloth. This helps keep the latch in good shape.
Frequently Asked Questions
How To Open The Hood On A 2020 Jeep Cherokee?
To open the hood on a 2020 Jeep Cherokee, locate the hood release lever under the dashboard. Pull the lever, then move to the front of the vehicle. Find the secondary latch under the hood’s center and release it. Lift the hood and secure it with the prop rod.
How Do You Lift The Hood On A Jeep Cherokee?
To lift the hood on a Jeep Cherokee, locate the hood release lever inside the vehicle. Pull it. Then, go to the front of the Jeep, find the secondary latch under the hood, and lift it to open.
How To Open A Jeep Hood Latch?
Locate the hood release lever inside the Jeep, usually near the driver’s side footwell. Pull the lever. Exit the vehicle and find the secondary latch under the hood’s center. Push the latch to fully release the hood. Lift the hood and secure it with the prop rod.
How To Open The Hood Of A Jeep Grand Cherokee From The Outside?
Locate the hood release lever under the dashboard on the driver’s side. Pull the lever to unlock the hood. Move to the front of the Jeep, find the secondary latch under the hood, and lift it to open.
Conclusion
Opening the hood of a 2020 Jeep Cherokee is straightforward. Follow these steps. Ensure the vehicle is parked safely. Pull the release lever inside. Locate the secondary latch under the hood. Lift the hood carefully. Regular maintenance checks are crucial.
This keeps your Jeep running smoothly. With these tips, you’ll manage easily. Happy driving!