Putting a 2018 Jeep Compass in neutral is straightforward. You can do it in a few simple steps.
Sometimes, you need to put your Jeep Compass in neutral. It could be for towing, pushing, or troubleshooting. Knowing how to do this is important. It helps keep you safe and prevents damage to your vehicle. This guide will explain the steps clearly.
We’ll make sure you understand each step. Whether you’re a new driver or just new to this vehicle, you’ll find this guide helpful. Let’s get started with the details on how to put your 2018 Jeep Compass in neutral.
Preparing The Jeep Compass
Park the Jeep on level ground. Set the parking brake. Press the brake pedal with your foot. Keep it pressed. Safety is key.
Find the gear shift lever. It is near the driver’s seat. The letters P, R, N, D, and L are on it. N stands for neutral. Move the lever to N. Check the dashboard to confirm.
Credit: www.tiktok.com
Understanding The Gear System
Automatic cars shift gears by themselves. Manual cars need you to change gears. A 2018 Jeep Compass can have either type of transmission. Each type has a different way to put the car in neutral. Always know which type you are driving. This helps you take the right steps.
The gear shift indicator shows the current gear. In an automatic car, you will see “P,” “R,” “N,” and “D”. “N” stands for neutral. In a manual car, you need to move the gear stick to the middle. This is neutral. Always look at the indicator to confirm the gear. This keeps you safe.
Accessing The Gear Shift
First, locate the small cover near the gear shift. Use a small tool to pop the cover open. This reveals the shift lock release button. Press the button while moving the gear shift to neutral. This process may need some force. Be gentle but firm.
Start by finding the screws holding the cover. Use a screwdriver to remove these screws. Once removed, gently lift the cover off. This gives you access to the gear shift. Ensure no wires get disconnected. This makes the process smoother.
Manual Override Of The Gear Shift
Locate the gear shift console. Find the small slot near the shifter. It’s usually covered by a plastic cap. Use a small tool to remove the cap. This reveals the override slot.
Insert the override tool into the slot. Push down gently. This will unlock the gear shift. Move the gear shift to Neutral. Ensure the vehicle is secure before doing this. Use the brake to keep the car steady.
Shifting To Neutral
First, start the Jeep. Ensure the car is on a flat surface. Locate the gear shift lever. Place your foot on the brake. Press down firmly. Move the gear shift to the Neutral position. The dashboard will show “N”. This confirms the shift.
Take your foot off the brake. The Jeep should not move. If the car rolls, the gear is not in Neutral. Check the dashboard again. Adjust the gear shift if needed. Safety is important. Always ensure the car is truly in Neutral.
Credit: www.tiktok.com
Reassembling The Gear Shift
Begin by placing the gear shift cover over the gear lever. Make sure the cover fits snugly. Next, press down to snap the cover into place. You should hear a click. This means the cover is secure. Check all sides of the cover. It should be even and firmly attached. If it moves or feels loose, press it again.
Start the car. Move the gear shift to different positions. Ensure it moves smoothly. The gear shift should feel steady and responsive. Try putting the car in neutral. The shift should lock into place. If it feels loose, recheck the cover attachment. It might need another press. The gear shift should work without any issues. Drive safely!
Ensuring Safety After Shifting
Shifting into neutral on a 2018 Jeep Compass is vital for safety. Locate the gear shift, press the brake, then move the lever to neutral.
Engaging The Parking Brake
Engage the parking brake to keep the Jeep from moving. This is a key step for safety. Pull the brake lever up until it locks in place. Make sure it feels secure. This will prevent the vehicle from rolling away.
Double-checking The Vehicle’s Position
Check the vehicle’s position after shifting to neutral. Ensure it stays still. You should not see any movement. Look around the car to confirm. This ensures the Jeep is safe and secure.
Troubleshooting Common Issues
Sometimes, the gear shift gets stuck. This can be frustrating. Check the brake pedal first. Make sure you press it fully. Inspect the shift lock. It might be the issue. Look for any debris near the gear shift. This can cause problems too. Consult your manual for specific instructions. If nothing works, call a mechanic.
The override tool might fail sometimes. Ensure it is correctly placed. Make sure you follow the manual. Clean the tool to remove any dirt. Try using a spare tool. If it still does not work, seek professional help. It is best to avoid further damage.
Credit: www.youtube.com
Frequently Asked Questions
How To Put A Jeep In Neutral Without Turning On?
To put a Jeep in neutral without turning it on, locate the shift lock release. Insert a key or tool, then move the shifter to neutral.
How To Tow A 2018 Jeep Compass?
To tow a 2018 Jeep Compass, use a flatbed or a tow dolly. Always follow the owner’s manual instructions for proper towing procedures. Make sure the vehicle is in neutral and the parking brake is off. Secure the vehicle with straps and check all connections before towing.
What Is The Lawsuit Against The 2018 Jeep Compass?
The lawsuit against the 2018 Jeep Compass involves allegations of defective engines and faulty electrical systems. Owners claim these issues cause stalling, power loss, and other safety concerns.
Where Is The Easter Egg On My 2018 Jeep Compass?
The Easter egg on a 2018 Jeep Compass is located under the passenger seat. Look for a small gecko symbol.
Conclusion
Putting a 2018 Jeep Compass in neutral is simple. Follow the steps outlined. Practice makes it easier each time. Remember to keep safety in mind. Always ensure the vehicle is secure. This prevents accidents or rollaways. Stay confident and drive safely.
Your Jeep Compass will thank you.