Resetting the oil light on your Jeep Compass is simple. It ensures your vehicle runs smoothly.
Maintaining your Jeep Compass involves various tasks. One important task is resetting the oil light. This light reminds you when it’s time for an oil change, which keeps your engine healthy. Over time, even after changing the oil, the light might stay on.
Knowing how to reset it yourself can save you a trip to the mechanic. This guide will help you reset the oil light on your Jeep Compass quickly and efficiently. Keep reading to learn the steps and keep your Jeep in top shape.
Credit: www.myjeepcompass.com
Preparation
Resetting the Jeep Compass oil light is a simple process. Turn the ignition on without starting the engine. Press the gas pedal three times within ten seconds.
Gather Necessary Tools
First, get the car keys. A pen and paper can help too. Write down the steps. Make sure you have a flashlight. This can help see in dark spots. You might need a wrench. A small screwdriver is useful too. These tools are simple but important.
Ensure Vehicle Is Parked
Start by parking the Jeep Compass. Make sure it is on a flat surface. Turn off the engine. This keeps you safe. Pull the handbrake up. This keeps the car from moving. Double-check the gear is in park mode. Safety first.
Credit: www.youtube.com
Locate The Oil Light Indicator
Find the oil light indicator on the dashboard of your Jeep Compass. It usually looks like an oil can symbol.
Dashboard Overview
The dashboard has many lights and symbols. Some show car issues. Others show car status. The oil light is among them. It looks like a small oil can. It lights up when the oil needs checking.
Understanding The Indicator Symbols
The oil light is very important. It helps you know the oil level. If it is on, you need to check the oil. If it blinks, it means there is a bigger issue. Knowing these symbols helps you take care of your car.
Access The Vehicle’s Ignition
To reset the Jeep Compass oil light, first access the vehicle’s ignition. Turn it to the “On” position without starting the engine.
Turn The Ignition To ‘on’
Insert the key into the ignition. Turn the key to the ‘On’ position. Do not start the engine. The dashboard lights will turn on. The gauges will move. This means the car is ready.
Avoid Starting The Engine
Ensure you do not turn the key fully. The engine should not start. Only the electrical systems should be on. This is important for resetting the oil light.
Resetting The Oil Light
Start your Jeep Compass. Look at the dashboard screen. Press the menu button on the steering wheel. Scroll through the options. Find the ‘Vehicle Info’ section. Select it. You will see different options. Look for the ‘Oil Life’ option. Select it.
Press and hold the ‘OK’ button. Wait a few seconds. The oil life percentage should reset to 100%. Check the dashboard to ensure it worked. If it didn’t, repeat the steps. Make sure to follow each step carefully. This will help maintain your Jeep Compass.
Verify The Reset
Make sure the oil light is off. Turn on the Jeep. Look at the dashboard. If the light is off, the reset worked. If the light stays on, try resetting again.
Take the Jeep for a short drive. A few minutes is enough. Pay attention to the dashboard. Ensure the oil light stays off. If it comes back on, you might have a problem. Check the oil levels. Consult a mechanic if needed.
Troubleshooting
Sometimes, the oil light does not reset. This can happen after an oil change. First, ensure the oil level is correct. Check the oil filter for any problems. A faulty filter can cause issues. Another common cause is a malfunctioning oil sensor. Replacing the sensor can solve the problem.
If the oil light stays on, seek help. A mechanic can check the engine. There might be a bigger issue. Do not ignore a persisting oil light. It can lead to serious engine damage. Always be safe and get professional advice when needed.
Maintenance Tips
Regular oil changes keep your engine running smoothly. Clean oil improves engine performance. It also reduces wear and tear. Changing oil on time prevents sludge buildup. This helps to extend engine life. Use the recommended oil for best results.
Follow the service schedule in your manual. Service intervals vary by model. Keep a log of all services performed. This helps to maintain your car’s health. Timely service can prevent costly repairs. It ensures that your car runs efficiently.
Credit: www.vehiclehistory.com
Frequently Asked Questions
How To Reset Jeep Oil Change Light?
To reset the Jeep oil change light, turn the ignition to “ON” without starting the engine. Press the gas pedal three times within 10 seconds. Turn the ignition off, then start the engine. The light should reset. Consult your owner’s manual for specific instructions.
How To Manually Reset The Oil Change Light?
Turn the ignition on without starting the engine. Press the gas pedal three times within 10 seconds. Turn the ignition off, then start the engine. The oil change light should reset.
How Do You Reset The Service Engine On A Jeep Compass?
Turn the ignition to “On” without starting the engine. Press the gas pedal three times within 10 seconds. Turn off the ignition.
How Do You Reset The Check Engine Light On A 2018 Jeep Compass?
To reset the check engine light on a 2018 Jeep Compass, disconnect the battery for 15 minutes. Reconnect, then start the engine. If the light remains, consult a mechanic.
Conclusion
Resetting the Jeep Compass oil light is simple. Just follow the steps. Regular maintenance keeps your Jeep running smoothly. Save time and avoid costly repairs. Ensure a longer life for your vehicle. Always consult your manual for specific instructions. Now, you’re ready to handle oil light resets with ease.
Thank you for reading. Drive safely and maintain your Jeep Compass well.