Resetting the oil light on a 2014 Jeep Compass is simple. You don’t need special tools or expert knowledge.
If the oil light is on, it means it’s time for maintenance. Ignoring it can lead to engine problems. The oil light reminds you to change the oil and filter. After doing this, you must reset the light to keep your vehicle running smoothly.
Resetting the oil light ensures the system tracks the next oil change accurately. This guide will walk you through the process step-by-step, ensuring your Jeep Compass runs efficiently. Follow along to learn how to reset the oil light on your 2014 Jeep Compass with ease.
Credit: www.jeeppatriot.com
Preparation
Gathering the right tools makes the job easier. You will need a good pair of gloves, a wrench, and a clean rag. Having a flashlight can help you see better. Make sure these tools are within reach.
Safety is very important. Always work in a well-lit area. Make sure the car is on a flat surface. Use wheel chocks to prevent the car from moving. Always wear gloves to protect your hands. Never work under a lifted car without proper support.
Credit: www.jeeppatriot.com
Locate The Ignition
Find your car’s ignition. The ignition is where you put your key to start your car. It is usually on the right side of the steering wheel. Look carefully and be sure it is the ignition before you continue.
Key Position
Insert the key into the ignition. Turn the key to the ‘On’ position. This is one click before the car starts. Do not start the engine. Keep the key in this position for a few seconds.
Dashboard Indicators
Check the dashboard. Look for the oil light. It should be on. Turn the key back to the ‘Off’ position. Wait for about ten seconds. Repeat the steps three times. Finally, start the car. The oil light should now be off.
Access Oil Change Menu
Press the menu button on the steering wheel. Look for the vehicle info section. Use the arrow buttons to navigate through options. Find the oil life or oil change menu. Select it by pressing the OK button. This will take you to the oil reset option.
Turn the key to the on position. Do not start the engine. Look at the dashboard screen. Use the steering wheel controls to move through the menu. Find the oil change reminder. This is where you can reset the oil light. Follow the prompts on the screen.
Credit: www.youtube.com
Resetting The Oil Light
Turn the ignition to the “ON” position. Do not start the engine. Press the “Gas Pedal” fully three times within 10 seconds. Turn the ignition to the “OFF” position.
Start the car and check the oil light. If the light is off, the reset was successful. If the light is still on, repeat the steps.
Troubleshooting
Oil light not resetting is a common problem. Sometimes, the button sequence is tricky. Pressing buttons too fast or too slow can cause issues. The car’s computer system can also have errors. Faulty sensors might be another reason. They send wrong signals to the system. Always check if the oil was changed properly. Low oil levels might trigger the light again. Also, ensure the correct oil type was used.
Start by checking the car manual. It has specific steps. Follow the steps carefully. Make sure the car is on a level surface. Press the buttons in the right order. Timing is key. Sometimes, it takes a few tries. Have patience. If it doesn’t work, consider asking a mechanic. They can help reset it. Always double-check everything. It can save you time and frustration.
After Resetting
Resetting the oil light on a 2014 Jeep Compass is simple. Turn the ignition to the “On” position, press the gas pedal three times within 10 seconds, and turn the ignition off. Your oil light should be reset.
Checking The Oil Level
After resetting the oil light, check the oil level. Use the dipstick to see if the oil is at the right mark. If the oil is low, add more oil. Make sure not to overfill. Keeping the oil level correct is important for the engine.
Scheduling Regular Maintenance
Schedule regular oil changes for your Jeep Compass. Follow the maintenance schedule in the owner’s manual. Regular oil changes keep the engine running well. Mark the dates on a calendar or set reminders on your phone. This way, you won’t forget the next oil change.
Frequently Asked Questions
How To Reset Jeep Oil Change Light?
Turn the ignition to “On” without starting the engine. Press the gas pedal three times within 10 seconds. Turn the ignition off. The oil change light should reset.
How To Reset Engine Light On 2014 Jeep Compass?
To reset the engine light on a 2014 Jeep Compass, disconnect the battery for 15 minutes. Reconnect it. If the light remains, consult a professional.
How To Reset The Oil Change On A 2014 Jeep Cherokee?
Turn the ignition to “On” without starting the engine. Press the gas pedal three times within 10 seconds. Turn off the ignition.
How To Reset Perform Service On Jeep Compass?
To reset the “Perform Service” light on a Jeep Compass, turn the ignition to “On” without starting the engine, press the gas pedal three times within 10 seconds, then turn the ignition off.
Conclusion
Resetting the oil light on your 2014 Jeep Compass is simple. Follow these steps carefully. This will help maintain your vehicle’s performance. Regular maintenance is key to a long-lasting car. Always refer to your owner’s manual for detailed instructions. Keep your Jeep running smoothly with timely oil changes.
Taking care of your car ensures safety and reliability. Now, you can reset your oil light with ease. Enjoy your drives with peace of mind.