Resetting the oil light on your 2019 Jeep Compass is simple. You can do it yourself in just a few steps.
When the oil light comes on, it’s a reminder to change your oil. But sometimes, even after an oil change, the light stays on. This can be annoying and confusing. Knowing how to reset it will save you a trip to the mechanic.
Plus, it helps you keep track of your vehicle’s maintenance schedule. In this guide, we will walk you through the steps to reset the oil light. It’s quick and easy. Follow along to learn how to do it yourself.
Credit: www.myjeepcompass.com
Preparation
Resetting the oil light on a 2019 Jeep Compass is simple. Turn the ignition to the “On” position without starting the engine. Press the gas pedal three times within ten seconds.
Gather Necessary Tools
You need a few tools. A key fob and owner’s manual are important. Have them ready before starting. You might also need a flashlight. This helps see the dashboard clearly.
Ensure Vehicle Is Off
Make sure the vehicle is off. Insert the key into the ignition. Do not start the engine. Just turn it to the “On” position. This is crucial for safety. Always check the car is off.
Locate Oil Light
Resetting the oil light on a 2019 Jeep Compass is simple. Turn the ignition to the ‘On’ position without starting the engine. Press the gas pedal three times within ten seconds. Turn the ignition off and then start the engine to ensure the oil light is reset.
Dashboard Indicators
The dashboard shows many lights and symbols. Each has a specific meaning. The oil light is one of them. It looks like a small oil can.
Oil Light Symbol
The oil light symbol is easy to spot. It appears as a small oil can with a drop of oil. Sometimes, it may flash or stay on. This means you need to check your oil.
Ignition Steps
First, sit in the driver’s seat. Insert the key into the ignition. Turn the key to the ‘On’ position. Do not start the engine. Check the dashboard for any lights. Wait a few seconds for the lights to come on.
Keep the engine off. This step is important. Do not turn the key all the way. Only the dashboard should light up. Do not press the gas pedal. This keeps the engine off. Follow these steps carefully to reset the oil light.
Pedal Sequence
First, turn the ignition key to the “ON” position. Do not start the engine. Next, press the gas pedal three times. Do this within ten seconds. Make sure each press is full and smooth. This step is crucial for the reset.
Timing is important. Press the pedal three times within ten seconds. If you miss it, start again. Turn the key back to “OFF”. Wait for a few seconds. Then repeat the steps.
Verify Reset
First, start your Jeep Compass. Make sure it is in park. Turn the ignition on. Do not start the engine. Wait for the dashboard lights to come on. Look for the oil light. It should be on.
Check if the oil light is off. It means the reset was successful. If the light is still on, repeat the steps. Ensure all steps are followed correctly. Sometimes, it takes a few tries. Be patient.
Credit: www.reddit.com
Troubleshooting
If the oil light stays on, you may need to repeat the steps. Make sure each step is done correctly. Sometimes it takes a few tries. Be patient and do not skip any step. This helps ensure the light will reset properly.
The owner’s manual is very helpful. It has detailed instructions. It can guide you through the process. Keep it handy for any questions. Following the manual can prevent mistakes. Always refer to it if unsure.
Additional Tips
For additional tips, make sure the Jeep Compass is on level ground and the parking brake is engaged. Always consult the owner’s manual for specific instructions.
Regular Maintenance
Regular maintenance keeps your car in good shape. Change the oil on time. Check the tire pressure often. Look at the brake pads. Clean the air filter. Doing these things will help your Jeep Compass run well. It will also save you money in the long run.
When To Seek Professional Help
Seek professional help if the oil light stays on. The issue might be more serious. A trained mechanic can find the problem. They have the right tools. They have the right skills. They will fix your car quickly. Do not ignore the oil light. It is important for your car’s health.
Credit: www.youtube.com
Frequently Asked Questions
How Do You Reset The Oil Change Light On A 2019 Jeep Compass?
To reset the oil change light on a 2019 Jeep Compass, turn the ignition to the “On” position. Press the gas pedal three times within 10 seconds. Turn off the ignition. Start the engine to confirm the reset.
How To Reset Engine Light 2019 Jeep Compass?
To reset the engine light on a 2019 Jeep Compass, disconnect the battery for 15 minutes. Reconnect and start the vehicle. If the light remains, consult a mechanic.
How To Reset A Jeep After An Oil Change?
To reset a Jeep after an oil change, turn the ignition to “ON” without starting the engine. Press the gas pedal three times within 10 seconds. Turn the ignition off, then start the engine to ensure the light is reset.
How Do You Reset The Screen On A 2019 Jeep Compass?
To reset the screen on a 2019 Jeep Compass, hold the volume and tuner knob for 10-15 seconds. The screen will reboot.
Conclusion
Resetting the oil light on your 2019 Jeep Compass is simple. Follow the steps carefully. Ensure your vehicle’s maintenance is up-to-date. Regular maintenance keeps your Jeep running smoothly. Save time and avoid unnecessary stress. Your Jeep Compass will thank you.
Keep this guide handy for future reference. Safe travels on the road ahead!