The starter on a 2012 Jeep Grand Cherokee is located on the lower side of the engine. It’s near the transmission, making it a bit tricky to spot without guidance.
Having trouble finding the starter on your 2012 Jeep Grand Cherokee? You’re not alone. This task can be confusing, especially if you’re not familiar with car engines. Knowing the location of the starter is important for troubleshooting and maintenance. In this post, we’ll guide you to find the starter and give you some tips on how to access it.
With our help, you’ll save time and avoid frustration. Let’s get started on this journey to locate your Jeep’s starter.
Location Of The Starter
The starter on a 2012 Jeep Grand Cherokee is in the engine bay. It is near the bottom of the engine. Look for it on the driver’s side. The starter is a small cylindrical part. It is attached to the transmission bell housing.
You may need to remove some parts to see it clearly. Check near the battery and air intake. The starter is usually connected with wires. These wires link it to the battery. If you see a small motor, that is the starter.
Tools Required
You need a few basic tools. A wrench set is essential. A socket set is also helpful. A screwdriver may be needed. Always have a flashlight. It helps you see better. Gloves protect your hands. A jack will lift your Jeep. Make sure it is sturdy.
A torque wrench is important. It ensures bolts are tight. A multimeter checks the starter. A scan tool reads error codes. These tools help diagnose problems. They make the job easier. Having them saves time. They also make the work safer.
Preparation Steps
Always ensure the car is off before starting. Disconnect the battery to avoid any shocks. Wear safety gloves and glasses. Work in a well-lit area. Keep a fire extinguisher nearby. Avoid wearing loose clothing. Double-check all tools before use. Stay focused and avoid distractions.
Park the Jeep on a flat surface. Use wheel chocks to prevent rolling. Raise the vehicle with a jack. Secure with jack stands for safety. Locate the starter near the engine. Consult the owner’s manual for exact location. Have all necessary tools ready. Ensure you have enough light to see clearly.
Credit: www.youtube.com
Accessing The Starter
Start by disconnecting the battery to avoid any shocks. Remove the air intake for better access. You might need to take off the skid plate as well. These steps will give you more space to work.
Move any wires that are in the way. Unclip the connectors that might block your reach. Check the area for any other parts that need to be moved. This will help you see the starter more clearly.
Identifying The Starter
The starter on a 2012 Jeep Grand Cherokee is located near the engine. It sits between the transmission and the engine block. To access it, look underneath the vehicle or through the engine bay.
Visual Characteristics
The starter on a 2012 Jeep Grand Cherokee is a small, cylindrical part. It is usually located near the engine. Look for a metal tube with wires attached to it. This part is often silver or black. It may have a small motor attached. The starter helps the engine begin running. It is important to find the right part.
Common Misidentifications
Some people confuse the starter with other parts. The alternator is one such part. It is also near the engine. The alternator is larger and has a belt. Another common mistake is confusing the starter with the solenoid. The solenoid is smaller and connected to the starter. Knowing these differences helps you find the starter.
Credit: www.moparpartsgiant.com
Starter Removal Process
First, locate the starter. It is under the engine, near the transmission. Disconnect the battery to avoid shocks. Find the electrical connections on the starter. Carefully unplug these connections. Use a wrench if needed. Place the wires away from the starter.
Find the bolts holding the starter in place. Use a wrench to loosen these bolts. There may be two or three bolts. Remove the bolts carefully. Hold the starter with one hand. Slowly pull the starter out. Place the starter on a safe surface.
Starter Installation
Place the new starter in the exact spot as the old one. Align it properly with the mounting holes. Make sure it sits flat and snug. Positioning is key for smooth installation.
Insert the bolts into the mounting holes. Tighten them securely but avoid over-tightening. Connect the wires to the starter terminals. Ensure all connections are tight. Check everything once more before finishing.
Credit: www.tiktok.com
Testing The Installation
Attach the battery cables tightly. Ensure the connections are secure and clean. This prevents any starting issues.
Turn the key to start the engine. Listen for any unusual sounds. The engine should start smoothly. If it does, the installation is successful.
Frequently Asked Questions
Where Is The Starter Located On A Jeep Grand Cherokee?
The starter on a Jeep Grand Cherokee is located on the passenger side of the engine. It’s near the transmission.
How Much Does It Cost To Replace A Starter On A 2012 Jeep Grand Cherokee?
Replacing a starter on a 2012 Jeep Grand Cherokee typically costs between $400 and $600, including parts and labor. Prices may vary.
Where Is The Starter Placed?
The starter is typically located near the engine, often on the passenger side below the exhaust manifold.
Why Is My Jeep Cherokee Not Starting But Has Power?
Your Jeep Cherokee might not start due to a faulty starter, bad ignition switch, or fuel system issues. Check battery connections too.
Conclusion
Locating the starter on your 2012 Jeep Grand Cherokee is straightforward. It sits near the engine’s bottom, close to the transmission. Check the passenger side for better access. Ensure your car is off before inspection. A quick look should help you spot it.
Now, you can confidently handle basic car maintenance. Always consult your manual for specific details. Stay safe and happy driving!